? PC/ABS CX7720注塑参数PC/ABS CX7720技术指数PC/ABS CX7720物性表 找嘉豪塑胶 嘉豪塑胶长期提供-嘉豪(佳林)塑胶,欢迎来电:0769-87791839 365体育投注怎么看直播_正规365体育投注_beta365体育投注
?

东莞嘉豪(佳林)365体育投注怎么看直播_正规365体育投注_beta365体育投注有限公司

联系人:谢经理

电话:0769-87791839

手机:13790262807

传真:0769-87717169

E-mail:jiahaosujiao@126.com

长期回收 水口料,365体育投注怎么看直播_正规365体育投注_beta365体育投注,胶头料,废料,杂料.库存料,积压料,以旧料换新料.

?
?
工程原料
PEEK耐高温料
PA导热塑料
PPS耐高温料
PPS导热塑料
PMMA红外线穿透
PC红外线穿透料
工程365体育投注怎么看直播_正规365体育投注_beta365体育投注
PC遮光料
PC加纤料
PC耐寒料
PC防火料
PC光扩散料
PC导热塑料
PC/ABS抽粒料
PC/ABS365体育投注怎么看直播_正规365体育投注_beta365体育投注
PMMA365体育投注怎么看直播_正规365体育投注_beta365体育投注
POM365体育投注怎么看直播_正规365体育投注_beta365体育投注
PBT365体育投注怎么看直播_正规365体育投注_beta365体育投注
PA66365体育投注怎么看直播_正规365体育投注_beta365体育投注
PA9T365体育投注怎么看直播_正规365体育投注_beta365体育投注
PA6T365体育投注怎么看直播_正规365体育投注_beta365体育投注
PA46365体育投注怎么看直播_正规365体育投注_beta365体育投注
PA11365体育投注怎么看直播_正规365体育投注_beta365体育投注
PA12365体育投注怎么看直播_正规365体育投注_beta365体育投注
LCP365体育投注怎么看直播_正规365体育投注_beta365体育投注
PPS365体育投注怎么看直播_正规365体育投注_beta365体育投注
PA6365体育投注怎么看直播_正规365体育投注_beta365体育投注
PC365体育投注怎么看直播_正规365体育投注_beta365体育投注
PA612365体育投注怎么看直播_正规365体育投注_beta365体育投注
PVDF365体育投注怎么看直播_正规365体育投注_beta365体育投注
PTFE365体育投注怎么看直播_正规365体育投注_beta365体育投注
PETG365体育投注怎么看直播_正规365体育投注_beta365体育投注
PEEK365体育投注怎么看直播_正规365体育投注_beta365体育投注
PPSU365体育投注怎么看直播_正规365体育投注_beta365体育投注
PFA365体育投注怎么看直播_正规365体育投注_beta365体育投注
PSU365体育投注怎么看直播_正规365体育投注_beta365体育投注
PPO365体育投注怎么看直播_正规365体育投注_beta365体育投注
PPE365体育投注怎么看直播_正规365体育投注_beta365体育投注
PPA365体育投注怎么看直播_正规365体育投注_beta365体育投注
PEI365体育投注怎么看直播_正规365体育投注_beta365体育投注
PET365体育投注怎么看直播_正规365体育投注_beta365体育投注
TPEE365体育投注怎么看直播_正规365体育投注_beta365体育投注
TPE365体育投注怎么看直播_正规365体育投注_beta365体育投注
TPO365体育投注怎么看直播_正规365体育投注_beta365体育投注
TPR365体育投注怎么看直播_正规365体育投注_beta365体育投注
?
?
?
?
?
?
嘉豪塑胶 >> 注塑参数 >> PC/ABS CX7720注塑参数PC/ABS CX7720技术指数PC/ABS CX7720物性表 找嘉豪塑胶 嘉豪塑胶长期提供
?
? ?
CYCOLOY? Resin CX7720 Asia Pacific: COMMERCIAL Non-chlorinated and non-brominated flame retardant PC/ABS offering balanced flow and impact plus improved heat resistance intended for various applications. TYPICAL PROPERTIES1 TYPICAL VALUE Unit Standard MECHANICAL Tensile Stress, yld, Type I, 50 mm/min 630 kgf/cm2 ASTM D 638 Tensile Strain, brk, Type I, 50 mm/min 40 % ASTM D 638 Flexural Stress, yld, 2.6 mm/min, 100 mm span 1040 kgf/cm2 ASTM D 790 Flexural Modulus, 2.6 mm/min, 100 mm span 27000 kgf/cm2 ASTM D 790 Hardness, Rockwell R 123 - ASTM D 785 IMPACT Izod Impact, notched, 23°C 54 cm-kgf/cm ASTM D 256 Izod Impact, notched, -30°C 16 cm-kgf/cm ASTM D 256 Instrumented Impact Total Energy, 23°C 622 cm-kgf ASTM D 3763 Instrumented Impact Total Energy, -30°C 553 cm-kgf ASTM D 3763 THERMAL Vicat Softening Temp, Rate B/50 112 °C ASTM D 1525 HDT, 1.82 MPa, 3.2mm, unannealed 90 °C ASTM D 648 HDT, 0.45 MPa, 6.4 mm, unannealed 104 °C ASTM D 648 HDT, 1.82 MPa, 6.4 mm, unannealed 95 °C ASTM D 648 CTE, -30°C to 30°C, flow 7.2E-05 1/°C ASTM D 696 CTE, -30°C to 30°C, xflow 7.2E-05 1/°C ASTM D 696 Thermal Conductivity 0.2 W/m-°C ASTM C 177 Relative Temp Index, Elec 85 °C UL 746B Relative Temp Index, Mech w/impact 85 °C UL 746B Relative Temp Index, Mech w/o impact 85 °C UL 746B PHYSICAL Specific Gravity 1.18 - ASTM D 792 Specific Gravity, color 1.22 - ASTM D 792 Source GMD, last updated: PLEASE CONTACT YOUR LOCAL SALES OFFICE FOR AVAILABILITY IN YOUR AREA. DISCLAIMER : THE MATERIALS, PRODUCTS AND SERVICES OF SAUDI BASIC INDUSTRIES CORPORATION (SABIC) OR ITS SUBSIDIARIES OR AFFILIATES ( SELLER ) ARE SOLD SUBJECT TO SELLER S STANDARD CONDITIONS OF SALE, WHICH ARE AVAILABLE UPON REQUEST. INFORMATION AND RECOMMENDATIONS CONTAINED IN THIS DOCUMENT ARE GIVEN IN GOOD FAITH. HOWEVER, SELLER MAKES NO EXPRESS OR IMPLIED REPRESENTATION, WARRANTY OR GUARANTEE (i) THAT ANY RESULTS DESCRIBED IN THIS DOCUMENT WILL BE OBTAINED UNDER END-USE CONDITIONS, OR (ii) AS TO THE EFFECTIVENESS OR SAFETY OF ANY DESIGN OR APPLICATION INCORPORATING SELLER S MATERIALS, PRODUCTS, SERVICES OR RECOMMENDATIONS. UNLESS OTHERWISE PROVIDED IN SELLER S STANDARD CONDITIONS OF SALE, SELLER SHALL NOT BE RESPONSIBLE FOR ANY LOSS RESULTING FROM ANY USE OF ITS MATERIALS, PRODUCTS, SERVICES OR RECOMMENDATIONS DESCRIBED IN THIS DOCUMENT. Each user is responsible for making its own determination as to the suitability of Seller s materials, products, services or recommendations for the user s particular use through appropriate end-use and other testing and analysis. Nothing in any document or oral statement shall be deemed to alter or waive any provision of Seller s Standard Conditions of Sale or this Disclaimer, unless it is specifically agreed to in a writing signed by Seller. Statements by Seller concerning a possible use of any material, product, service or design do not, are not intended to, and should not be construed to grant any license under any patent or other intellectual property right of Seller or as a recommendation for the use of any material, product, service or design in a manner that infringes any patent or other intellectual property right. SABIC and brands marked with ? are trademarks of SABIC or its subsidiaries or affiliates. ? 2014 Saudi Basic Industries Corporation (SABIC). (1) Typical values only. Variations within normal tolerances are possible for various colors. All values are measured after at least 48 hours storage at 23°C/50% relative humidity. All properties, except the melt volume and melt flow rates, are measured on injection molded samples. All samples tested under ISO test standards are prepared according to ISO 294. (2) Only typical data for selection purposes. Not to be used for part or tool design. (3) This rating is not intended to reflect hazards presented by this or any other material under actual fire conditions. (4) Internal measurements according to UL standards. (5) Measurements made from laboratory test coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article. (6) Needs hard coat to consistently pass 60 sec Vertical Burn. CYCOLOY? Resin CX7720 Asia Pacific: COMMERCIAL TYPICAL PROPERTIES1 TYPICAL VALUE Unit Standard PHYSICAL Water Absorption, 24 hours 0.1 % ASTM D 570 Water Absorption, equilibrium, 23C 0.4 % ASTM D 570 Mold Shrinkage, flow, 3.2 mm (5) 0.4 - 0.6 % SABIC Method Mold Shrinkage, xflow, 3.2 mm (5) 0.4 - 0.6 % SABIC Method Melt Flow Rate, 260°C/2.16 kgf 10 g/10 min ASTM D 1238 ELECTRICAL Volume Resistivity 1.E+17 Ohm-cm ASTM D 257 Surface Resistivity >1.E+16 Ohm ASTM D 257 Dielectric Strength, in oil, 3.2 mm 19.4 kV/mm ASTM D 149 Relative Permittivity, 50/60 Hz 3 - ASTM D 150 Relative Permittivity, 100 Hz 3 - ASTM D 150 Dissipation Factor, 50/60 Hz 0.005 - ASTM D 150 Dissipation Factor, 100 Hz 0.0049 - ASTM D 150 Arc Resistance, Tungsten {PLC} 6 PLC Code ASTM D 495 Hot Wire Ignition {PLC) 1 PLC Code UL 746A High Voltage Arc Track Rate {PLC} 2 PLC Code UL 746A High Ampere Arc Ign, surface {PLC} 0 PLC Code UL 746A Comparative Tracking Index (UL) {PLC} 1 PLC Code UL 746A FLAME CHARACTERISTICS UL Recognized, 94V-0 Flame Class Rating (3) 1.49 mm UL 94 UL Recognized, 94-5VB Rating (3) 2.48 mm UL 94 Oxygen Index (LOI) 32 % ASTM D 2863 Source GMD, last updated: PLEASE CONTACT YOUR LOCAL SALES OFFICE FOR AVAILABILITY IN YOUR AREA. DISCLAIMER : THE MATERIALS, PRODUCTS AND SERVICES OF SAUDI BASIC INDUSTRIES CORPORATION (SABIC) OR ITS SUBSIDIARIES OR AFFILIATES ( SELLER ) ARE SOLD SUBJECT TO SELLER S STANDARD CONDITIONS OF SALE, WHICH ARE AVAILABLE UPON REQUEST. INFORMATION AND RECOMMENDATIONS CONTAINED IN THIS DOCUMENT ARE GIVEN IN GOOD FAITH. HOWEVER, SELLER MAKES NO EXPRESS OR IMPLIED REPRESENTATION, WARRANTY OR GUARANTEE (i) THAT ANY RESULTS DESCRIBED IN THIS DOCUMENT WILL BE OBTAINED UNDER END-USE CONDITIONS, OR (ii) AS TO THE EFFECTIVENESS OR SAFETY OF ANY DESIGN OR APPLICATION INCORPORATING SELLER S MATERIALS, PRODUCTS, SERVICES OR RECOMMENDATIONS. UNLESS OTHERWISE PROVIDED IN SELLER S STANDARD CONDITIONS OF SALE, SELLER SHALL NOT BE RESPONSIBLE FOR ANY LOSS RESULTING FROM ANY USE OF ITS MATERIALS, PRODUCTS, SERVICES OR RECOMMENDATIONS DESCRIBED IN THIS DOCUMENT. Each user is responsible for making its own determination as to the suitability of Seller s materials, products, services or recommendations for the user s particular use through appropriate end-use and other testing and analysis. Nothing in any document or oral statement shall be deemed to alter or waive any provision of Seller s Standard Conditions of Sale or this Disclaimer, unless it is specifically agreed to in a writing signed by Seller. Statements by Seller concerning a possible use of any material, product, service or design do not, are not intended to, and should not be construed to grant any license under any patent or other intellectual property right of Seller or as a recommendation for the use of any material, product, service or design in a manner that infringes any patent or other intellectual property right. SABIC and brands marked with ? are trademarks of SABIC or its subsidiaries or affiliates. ?2014Saudi Basic Industries Corporation (SABIC). (1) Typical values only. Variations within normal tolerances are possible for various colors. All values are measured after at least 48 hours storage at 23°C/50% relative humidity. All properties, except the melt volume and melt flow rates, are measured on injection molded samples. All samples tested under ISO test standards are prepared according to ISO 294. (2) Only typical data for selection purposes. Not to be used for part or tool design. (3) This rating is not intended to reflect hazards presented by this or any other material under actual fire conditions. (4) Internal measurements according to UL standards. (5) Measurements made from laboratory test coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article. (6) Needs hard coat to consistently pass 60 sec Vertical Burn. CYCOLOY? Resin CX7720 Asia Pacific: COMMERCIAL PROCESSING PARAMETERS TYPICAL VALUE Unit Injection Molding Drying Temperature 80 - 90 °C Drying Time 3 - 4 hrs Drying Time (Cumulative) 8 hrs Maximum Moisture Content 0.04 % Melt Temperature 245 - 275 °C Nozzle Temperature 245 - 275 °C Front - Zone 3 Temperature 245 - 275 °C Middle - Zone 2 Temperature 220 - 275 °C Rear - Zone 1 Temperature 220 - 255 °C Mold Temperature 60 - 80 °C Back Pressure 0.3 - 0.7 MPa Screw Speed 40 - 70 rpm Shot to Cylinder Size 30 - 80 % Vent Depth 0.038 - 0.076 mm ? NOTE: Back Pressure, Screw Speed, Shot to Cylinder Size and Vent Depth are only mentioned as general guidelines. These may not apply or need adjustment in specific situations such as low shot sizes, thin wall molding and gas-assist molding. Source GMD, last updated: PLEASE CONTACT YOUR LOCAL SALES OFFICE FOR AVAILABILITY IN YOUR AREA. DISCLAIMER : THE MATERIALS, PRODUCTS AND SERVICES OF SAUDI BASIC INDUSTRIES CORPORATION (SABIC) OR ITS SUBSIDIARIES OR AFFILIATES ( SELLER ) ARE SOLD SUBJECT TO SELLER S STANDARD CONDITIONS OF SALE, WHICH ARE AVAILABLE UPON REQUEST. INFORMATION AND RECOMMENDATIONS CONTAINED IN THIS DOCUMENT ARE GIVEN IN GOOD FAITH. HOWEVER, SELLER MAKES NO EXPRESS OR IMPLIED REPRESENTATION, WARRANTY OR GUARANTEE (i) THAT ANY RESULTS DESCRIBED IN THIS DOCUMENT WILL BE OBTAINED UNDER END-USE CONDITIONS, OR (ii) AS TO THE EFFECTIVENESS OR SAFETY OF ANY DESIGN OR APPLICATION INCORPORATING SELLER S MATERIALS, PRODUCTS, SERVICES OR RECOMMENDATIONS. UNLESS OTHERWISE PROVIDED IN SELLER S STANDARD CONDITIONS OF SALE, SELLER SHALL NOT BE RESPONSIBLE FOR ANY LOSS RESULTING FROM ANY USE OF ITS MATERIALS, PRODUCTS, SERVICES OR RECOMMENDATIONS DESCRIBED IN THIS DOCUMENT. Each user is responsible for making its own determination as to the suitability of Seller s materials, products, services or recommendations for the user s particular use through appropriate end-use and other testing and analysis. Nothing in any document or oral statement shall be deemed to alter or waive any provision of Seller s Standard Conditions of Sale or this Disclaimer, unless it is specifically agreed to in a writing signed by Seller. Statements by Seller concerning a possible use of any material, product, service or design do not, are not intended to, and should not be construed to grant any license under any patent or other intellectual property right of Seller
[来源:原创] [作者:dgjiahao] [日期:14-04-21] [热度:]

评论



? ?
?
业务电话:0769-87791839传真:0769-87717169 产品展示
东莞嘉豪(佳林)365体育投注怎么看直播_正规365体育投注_beta365体育投注有限公司. Design By :UL黄卡 . PP抽粒料 PP抽粒料_ PA66加纤料_ PA12拉管料_ POM副牌料_ PPS导热塑料_ PC光扩散料_ LCP365体育投注怎么看直播_正规365体育投注_beta365体育投注